• Earl’s All-Purpose MulTfill is used directly from the container. If content hardened during cold weather, just add few drops of warm water then stir to soften. It is advisable to keep the container tightly sealed.

• Mix in color prior to application or apply stain when fully dried that it sands off like a baby powder. Mix 2 or 3 Earl’s All-Purpose MulTfill colors to achieve your desired shade or add colorant or oxide.

• Always test some coating on the filler prior to use.

• To fill big holes and deep cracks, fill in layers of 6mm at a time, allowing sufficient drying between each layer.

• Earl’s All-Purpose MulTfill is ready to sand when color fades and does not blind nor clog sandpaper. It sets rock hard.

• Earl’s All-Purpose MulTfill can be thinned slightly with warm water. Stir to make a paste. Don’t add more than 10% water by weight.

• Use a plastic spatula for best results.

• Different depths and timbers have different drying time. The deeper the fill, the longer it takes to dry.

• Earl’s All-Purpose MulTfill can be speed dried with a heat gun or inside the drying room.

• No waste. Return unused Earl’s All-Purpose MulTfill to the container.

• Do not store Earl’s All-Purpose MulTfill with excess water inside the container for a long period time. Trapped excess water will cause the putty to become contaminated.